DTH Hammer Breakout Bench Chain Link

DTH Hammer Breakout Bench Chain Link

DTH hammer breakout bench chain hyperlink
Specifications 
1. For disassembling the dth hammer 
2. Effortless operation 
3. Lower cost 
four. For three” to 30″ hammers 
5. CE certificate 
DHT Hammer Breaout Bench from HangCZPT CZPT factory co., Ltd. 

The threaded connections of the driver chuck and top sub might grow to be really tightly tensioned during drilling. It is handy to crack the hammer threads on the rig, but if the threads can not be loosened or tend to get trapped, a breakout bench is the resolution. 

This useful but strong breakout bench can easily be placed in a workshop or container and it breaks DTH hammers amongst three-eight”.
The breakout bench is CZPT in two types, 1 for three-5″hammer, and yet another for six-8″ hammer. 
Observe! ! ! The breakout bench is shipped with wrench keys. 

The operation strategy as under: 
one). Put hammer on the bench. 
two). Adjust the position of the hammer and wrench Use wrench to block the leading sub facet of hammer Permit wrench and jack in the same encounter. 
three). Resolve K-formed foundation with nut. 
four). Resolve wrench with nuts. 
5). Shake manage of jack slowly until best sub away from hammer. 
6). Following leading sub dismantled, grease the jack, release nuts, discharge the K-shaped foundation and flip all around the hammer. 
7). Modify the position of hammer and wrench Use wrench to block the drive chuck of hammer Let wrench and jack in the same face. 
8). Fix hammer 
nine). Repair K-shaped base and the wrench with nut. 
10). Shake manage of jack little by little until drive chuck away from hammer

Model BLHB-five BLHB-eight
Work hammers 3-5″ 6-8″
Size 920mm 1100mm
Width 510mm 620mm
Peak 875mm 875mm
Bodyweight 200kg 230kg
CZPT areas list Component No
3-five” 6-8″
Compressing Jack CCX-01 CCX-01A
Higher lock block CCX-02 CCX-02A
Reduced lock block CCX-03 CCX-03A
Wrench Jack CCX-04 CCX-04A
Oil Pump CCX-05 CCX-05A
 

 

DTH Hammer Breakout Bench Chain Link